Paints, varnishes, plasters and accessories
Bekament BK-Kul Decorative mosaic plaster
Application temperature:
From +5°C to +30°C do not work in direct sunlight, rain or strong wind.
High humidity and low temperatures can significantly increase bonding time
on the plaster.
Spending rate:
~ 5kg/m2.
From +5°C to +30°C do not work in direct sunlight, rain or strong wind.
High humidity and low temperatures can significantly increase bonding time
on the plaster.
Spending rate:
~ 5kg/m2.
Prices from €0.46
Description
Description
Decorative mosaic plaster of polyvinyl chloride for permanent protection of facade surfaces.It is characterized by exceptional hardness, water resistance and protection from atmospheric influences.
Preparation and application
Before application, the surface must be sound, clean, dry, without poorly connected parts, stains, grease, etc.Before applying BK Kul to the surface, BK-Acryl or BK-Grund Universal primer must be applied,
colored in the approximate shade of the finishing plaster.
The time for laying the mortar is a minimum of 12 hours.
Before applying BK-Kul is stirred until the mixture foams and, if necessary, diluted with a small amount of water - up to 1%
Dilution ratio: 0.08L of water per 8kg package.
Mixing of the material should be done from bucket to bucket, either by hand or with an electric mixer at low speed.
BK-Kul is applied with a steel trowel 2-2.5mm thick from bottom to top.
The applied layer must be well aligned to eliminate visible spaces between the grains.
It is necessary to work evenly and without interruption on continuous wall surfaces.
It is not intended for installation on facade surfaces within thermal insulation systems.