Paints, varnishes, plasters and accessories
Bekament BK-Plast Facade acrylic plaster
Application temperature:
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.
Consumption:
Approx. 2. 3-3. 3 kg/m² depending on the structure and grain size.
Shelf life and storage:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.
Consumption:
Approx. 2. 3-3. 3 kg/m² depending on the structure and grain size.
Shelf life and storage:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.
Prices from €26.85
Description
Application
Thin-layer decorative plaster in pasty state,made on the basis of high-quality acrylic emulsion, intended for the protection of facade walls.
It is characterized by good adhesion to the base, as well as easy workability, high strength and water resistance.
Preparation and application
The substrate to which the render is applied must be solid, clean, dry and coated with BK-Acryl primer.Mix BK-Plast before application and if necessary dilute with a small amount of water ~ 1% ( 0.25l of water for 25kg).
The render is applied with a steel trowel with thickness of the largest grain.
Depending on the desired structure, the render is then processed with a plastic trowel, namely: Full structure – structured in a circular pattern immediately after application; Reib structure – after application scratch by circular motions until the desired structure is achieved.
It is necessary to work evenly and without interruption on continuous wall surfaces.