Pliers
Isolation Pliers 16mm Richmann C7067
Nomenclature number: 1234C7067
Type: Insulated pliers
Adjustment range [mm²]: 0.5 to 5
Length [mm]: 160
Tool steel: Chrome-Vanadium (Cr-V)
Handle: non-slip
Jaw length [mm]: 35
Jaw width [mm]: 10
Product No.: C7067
EAN: 5906741670678
Weight [kg]: 0.187
Adjustment range [mm²]: 0.5 to 5
Length [mm]: 160
Tool steel: Chrome-Vanadium (Cr-V)
Handle: non-slip
Jaw length [mm]: 35
Jaw width [mm]: 10
Product No.: C7067
EAN: 5906741670678
Weight [kg]: 0.187
€4.90
Description
Insulation pliers with a total length of 160 mm.
Easy to use and extremely useful for both electricians and do-it-yourselfers.
Manufactured from chrome-vanadium (Cr-V) steel, in which the chromium used guarantees increased resistance of the steel to corrosion, oxidation and abrasion, while the addition of vanadium improves the overall properties of the steel, including resistance to high temperatures or deformation.
Adjustable jaw pressure for wire thicknesses from 0.5 to 5 mm².
Total length of pliers is 160 mm.
Equipped with expansion spring.
HOW TO USE:
1.To strip the insulation, place the wire in the jaws, then press lightly and adjust the height with the knob.
2.Once adjusted, tighten the lock nut and you will have repeatability on wires of the same diameter.
3.When stripping, clamp the previously adjusted jaws onto the wire, then rotate the pliers in both directions to cut the outer insulation and pull to strip.
Easy to use and extremely useful for both electricians and do-it-yourselfers.
Manufactured from chrome-vanadium (Cr-V) steel, in which the chromium used guarantees increased resistance of the steel to corrosion, oxidation and abrasion, while the addition of vanadium improves the overall properties of the steel, including resistance to high temperatures or deformation.
Adjustable jaw pressure for wire thicknesses from 0.5 to 5 mm².
Total length of pliers is 160 mm.
Equipped with expansion spring.
HOW TO USE:
1.To strip the insulation, place the wire in the jaws, then press lightly and adjust the height with the knob.
2.Once adjusted, tighten the lock nut and you will have repeatability on wires of the same diameter.
3.When stripping, clamp the previously adjusted jaws onto the wire, then rotate the pliers in both directions to cut the outer insulation and pull to strip.